Rubber Cutting Ultrasonic Welding Transducer 2000W/20khz

Rubber Cutting Ultrasonic Welding Transducer 2000W/20khz
Ultrasound welding converts 50/60 Hertz current to 15, 20, 30 or 40 through an ultrasonic generator.
KHz power. The converted high frequency electric energy is converted into mechanical operation of the same frequency again through transducers.
The mechanical motion is then transmitted to the welding head through a set of amplitude-changing horn device. Welding head will
The received vibration energy is transmitted to the joint of the workpiece to be welded, where the vibration energy is passed through.
Friction is converted into heat to melt plastics. Ultrasound can not only be used to weld hard thermoplastic plastics
It can also process fabrics and films. The main components of an ultrasonic welding system include an ultrasonic generator.
Generator, transducer/horn/welding head triple set, die and frame. Utilization of Linear Vibration Friction Welding
Friction heat generated at the interface of two workpieces to be welded melts the plastics. Thermal energy comes from a certain pressure.
Under this condition, a workpiece moves back and forth on another surface with a certain displacement or amplitude. Once the expectations are met
At the same time, a certain amount of pressure will still be applied to the two workpieces.
Cooling and solidifying the part that has just been welded to form a tight bond. Track Vibration Friction Welding
Welding is a method of using friction heat energy to weld. When the track vibration friction welding is carried out, the upper part
The workpiece moves in orbit at a fixed speed - circularly in all directions. Exercise can be produced.
Thermal energy makes the welding parts of two plastic parts reach the melting point. Once the plastic begins to melt, the movement stops.
The welding parts of the two workpieces will be solidified and firmly connected. Small clamping force will lead to workpiece
Workpieces with a diameter of less than 10 inches can be rubbed by track vibration with minimal deformation.
Welding.
Type Full-length(mm) Joint Bolt(mm) Frequency(KHz) Resonance Impedance(Ω) Capacity(pF) Input Power
(W)
ARS-HJHNQ-152500 P8 153 M20×1.5 15 15 13000 2500
ARS-HJHNQ-152000 P8 167 M20×1.5 15 10 9500 2000
ARS-HJHNQ-151500 P4 171 M18×1.5 15 12 12500 1500
ARS-HJHNQ-151800 P4 118 M20×1.5 20 15 15000 1800
ARS-HJHNQ-202000 P8 128 M18×1 20 10 11000 2000
ARS-HJHNQ-202000 P8 124 M18×1.5 20 12 10000 1500
ARS-HJHNQ-20700 P8 112 1/2-20 UNF 20 15 9000 700
ARS-HJHNQ-20900 P8 133 1/2-20 UNF 20 15 10000 900
ARS-HJHNQ-20600 P8 121 M18×1.5 20 15 6000 600
ARS-HJHNQ-30500 P8 77 M10×1.5 30 5 5500 500
ARS-HJHNQ-28200 P4 92.1 M10×1 28 20 3000 200
ARS-HJHNQ-28100 P8 91 M8×1 28 25 2200 100
ARS-HJHNQ-28250 P8 94 1/2-20 UNF 28 20 4000 250
ARS-HJHNQ-202000 P8 128 1/2-20 UNF 20 10 20000 2000
ARS-HJHNQ-201500 P8 124 1/2-20 UNF 20 10 16000 1500
ARS-HJHNQ-201300 P8 128 1/2-20 UNF 20 10 12500 1300
ARS-HJHNQ-201500 P8 132 1/2-20 UNF 20 10 11000 1500
ARS-HJHNQ-20900 P8 123 1/2-20 UNF 20 10 9500 900
ARS-HJHNQ-152000 P4 171 M18×1.5 15 12 10000 2000
ARS-HJHNQ-35100 P8 71 M8×1 35 25 2200 100
ARS-HJHNQ-38100 P8 66 M8×1.25 38 40 1200 100
ARS-HJHNQ-38200 P4 65 M8×1 38 14 3300 200
Rubber Cutting Ultrasonic Welding Transducer 2000W/20khz
Rubber Cutting Ultrasonic Welding Transducer 2000W/20khz

TAG ultrasonic:


Name:
Tel:
Email:
Title:
Contents:

   Copyright © 2017-2019 Copyright OURSSONIC Ultrasonic transducer     ultrasonic cleaner