ultrasonic vibration screen transducer 33khz 100w

ultrasonic vibration screen transducer 33khz 100w
There is a part of the ultrasonic vibration screen called transducer. Some details of its use need attention. The main methods of using the transducer of the ultrasonic vibration screen are as follows:
Firstly, the transducer is locked on the mesh frame (the locking force is 40-50 kg), and then the ultrasonic mesh frame is loaded into the vibration screen.
(2) The power supply of the ultrasonic vibrating screen and the rotary vibrating screen are separately supplied, the rotary vibrating screen is three-phase power supply, and the power supply of the ultrasonic vibrating screen is single-phase power supply, both of which need reliable grounding.
The OUT of the rear panel of the power supply of the ultrasonic vibration screen is the output of the ultrasonic wave. Please insert the ultrasonic HF connection wire into the lock and check the reliable link.
The other end of the aviation plug of the HF link cable is connected with the transducer, and the seal is securely secured.
(4) Connect the power supply of the ultrasonic vibration screen and the ultrasonic HF link cable, and open the switch of the ultrasonic power supply after checking correctly.
With the sound of "droplets", the power supply of the ultrasonic vibration screen is activated, and the display window shows "vibration amplitude XXX micron" and enters the self-checking state. By adjusting the amplitude knob, the vibration amplitude can be adjusted.
Type Frequency(KHz) Input Power(W) Static Capacity
(pF)±10%
ARS-ZDHNQ33 33KHZ 100W 20-40
ARS-ZDHNQ35 35KHZ 100W 20-40
ultrasonic vibration screen transducer 33khz 100w
ultrasonic vibration screen transducer 33khz 100w

TAG ultrasonic:


Name:
Tel:
Email:
Title:
Contents:

   Copyright © 2017-2019 Copyright OURSSONIC Ultrasonic transducer     ultrasonic cleaner