Industrial Cleaning Ultrasonic Transducer 28khz/40khz/80khz

Industrial Cleaning Ultrasonic Transducer 28khz/40khz/80khz
High frequencies are usually used to clean smaller, more sophisticated parts or to remove tiny particles. High frequencies are also used in applications where damage is not allowed on the surface of the workpiece. The use of high frequency can improve the cleaning performance from several aspects. With the increase of frequency, the number of cavitation bubbles increases linearly, resulting in more and more intensive shock waves which can enter into smaller cracks. If the power remains unchanged, the cavitation bubble becomes smaller, and the energy released by the cavitation bubble decreases accordingly, which effectively reduces the damage to the workpiece surface. Another advantage of high frequencies is that they reduce the viscous boundary layer (the Ponuri effect), allowing ultrasound to'detect'tiny particles. We also have 68KHZ, 80KHZ, 100KHZ and 120KHZ high frequency ultrasonic oscillators.

Type	Length(mm)	Weight(g)	Frequency(KHz)	Resonance Impedance (Ω)	Static Capacity (pF)±10%	Input Power(W)
ARS-QXHNQ-20100 PZT-8	94	900	20	10-20	5200	100
ARS-QXHNQ-25100 PZT-4	77	710	25	10-20	6600	100
ARS-QXHNQ-28100 PZT-8	66	625	28	10-20	5200	100
ARS-QXHNQ-28100 PZT-4	66	624	28	10-20	6600	100
ARS-QXHNQ-30100 PZT-8	61	555	30	10-20	5200	100
ARS-QXHNQ-2560 PZT-4	77	530	25	10-20	5400	60
ARS-QXHNQ-2860 PZT-8	68	470	28	10-20	3800	60
ARS-QXHNQ-2850 PZT-4	82	425	28	10-20	4100	50
ARS-QXHNQ-3360 PZT-8	58	420	33	10-20	3800	60
ARS-QXHNQ-4060 PZT-8	55	300	40	10-20	3800	60
ARS-QXHNQ-4060 PZT-4	56	310	40	10-20	5400	60
ARS-QXHNQ-4050 PZT-4	54	260	40	10-20	4100	50
ARS-QXHNQ-4050-1 PZT-4	57	300	40	10-20	4100	50
ARS-QXHNQ-5435 PZT-4	36	135	54	10-20	3200	35
ARS-QXHNQ-6860 PZT-8	80	460	68	10-20	3800	60
ARS-QXHNQ-68120 PZT-4	67	588	68	10-20	7800	120
ARS-QXHNQ-8060 PZT-4	60	325	80	10-20	5400	60
ARS-QXHNQ-12060 PZT-4	56	260	120	10-20	5400	60
ARS-QXHNQ-13550 PZT-4	54	215	135	10-20	4200	50