oil filter system for auto parts Machined Stamped ultrasonic cleaner

oil filter system for auto parts Machined Stamped ultrasonic cleaner
Circulating ultrasonic cleaner
1. The wide frequency sweep circuit is adopted. With the change of liquid temperature, the ultrasonic frequency will sweep back and forth in the range of ± 1kHz around the center frequency. According to the frequency of power grid, it will reciprocate 50 times per second, which can drive the cleaning fluid and cavitation bubble to form fine reflux, completely eliminate the cleaning blind area caused by standing wave field, and at the same time, each energy converter will reach the best resonance state.
2. It adopts high-power module control, with strong output power, and greatly improves the safety performance of the electric control cabinet generator, effectively protecting the normal operation of the transducer; at the same time, it has built-in soft start system, with the ultrasonic power from weak to strong, reducing the strong impact of the current on the transducer during start-up, and extending the service life of the transducer.
3. The high-frequency ultrasonic transducer can not only clean the gap, but also not damage the surface of the workpiece. It has the characteristics of high impact intensity, fast cleaning speed, high ultrasonic density and good penetration;
4. Over voltage, over temperature and over current protection lines are designed, which are safe and reliable.
5. Add pneumatic seal cover to prevent heat emission or solvent volatilization during operation
6. The timing switch is configured, and the cleaning time can be set by itself
7. Filter circulation device, filter impurities generated after solvent cleaning, so that the solvent can be used repeatedly. Due to the use of advanced technology, its cleaning capacity can be recycled automatically, and it can be separated from the cleaning agent through physical filtering, greatly reducing the cleaning operation cost. The system adopts automatic circulation filtration mode and safe and reliable anti-corrosion pump, which enables the cleaning agent to filter through the filter screen and professional precision filter, and can effectively separate and remove the small particles of pollutants in the cleaning solution, oil dirt, dust and other pollutants and impurities, so as to ensure that the cleaning agent is always in a clean and efficient cleaning state, and at the same time, minimize the time when the workpiece is taken out Secondary pollution caused by pollutants in cleaning solution.
Type Internal size
L*W*H (mm)
Outsize mm
L*W*H (mm)
Frequency (Khz) Power
Total power(W) voltage
ARS-XHXJ-1006 280×210×210 320×250×350 20,28,33,40,80,130 300 100 400 220V
ARS-XHXJ-1012 400×310×280 520×430×600 20,28,33,40,80,130 600 500 1100 220V
ARS-XHXJ-1018 490×360×320 610×480×675 20,28,33,40,80,130 900 500 1400 220V
ARS-XHXJ-1024 630×430×320 740×550×675 20,28,33,40,80,130 1200 1000 2200 220V
ARS-XHXJ-1030 630×530×320 750×650×675 20,28,33,40,80,130 1500 100 2500 220V
ARS-XHXJ-1036 680×530×360 800×650×700 20,28,33,40,80,130 1800 1000 2800 220V
ARS-XHXJ-1040 680×570×400 830×710×735 20,28,33,40,80,130 2000 1000 3000 220V
ARS-XHXJ-1041 730×570×450 880×710×735 20,28,33,40,80,130 2400 2000 4400 220V
ARS-XHXJ-1042 790×670×510 940×765×785 20,28,33,40,80,130 3000 2000 5000 380V
ARS-XHXJ-1043 850×770×570 990×820×785 20,28,33,40,80,130 4000 2000 6000 380V
ARS-XHXJ-1044 910×820×620 1050×880×840 20,28,33,40,80,130 5000 3000 8000 380V
ARS-XHXJ-1045 960×870×680 1100×940×920 20,28,33,40,80,130 8000 4000 12000 380V
ARS-XHXJ-1046 1100×930×730 1160×1000×980 20,28,33,40,80,130 10000 5000 15000 380V
oil filter system for auto parts Machined Stamped ultrasonic cleaner
oil filter system for auto parts Machined Stamped ultrasonic cleaner

TAG ultrasonic:


   Copyright © 2017-2019 Copyright OURSSONIC Ultrasonic transducer     ultrasonic cleaner